Where is the cigarette lighter fuse on a 2000 Pontiac Grand Am?

Where is the cigarette lighter fuse on a 2000 Pontiac Grand Am?

Cigar lighter (power outlet) fuse in the Pontiac Grand Am is the fuse #34 in the Engine compartment fuse box.

Where is the cigarette lighter fuse on a 2007 Pontiac Grand Prix?

Fuse box is locate on the end of the instrument panel on the passenger side.

Where is the fuse for the cigarette lighter in a 2005 Pontiac Grand Am?

There is a fuse located in the “underhood junction block.” The fuse is a 20A fuse, and is in cavity number 34 — called the “AUX PWR/CIGAR” cavity. The underhood junction block is on the driver’s side of the engine compartment. There may even be some spare fuses for you to use in there.

How do you install a new cigar lighter?

Install the cigar lighter retainer by pressing the retainer into place until fully seated. Connect the electrical connector to the cigar lighter socket. Align the cigar lighter socket to the retainer and press the socket into place until fully seated. Install the cigar lighter fuse. Install the cigar lighter element.

What should I do if my cigarette lighter socket stops working?

If your cigarette lighter socket stops working, check the fuse first. Fuses are more likely to blow out than the socket and are also cheaper and easier to replace. Replace a cigarette lighter socket by buying a new one, then sliding it into the slot that holds it in place on your vehicle.

How do you remove a light from a cigarette lighter?

Take the light housing off to remove the cigarette lighter. A second metal cylinder, the light housing, covers the back end of the lighter socket. All you have to do is slide it off to remove it. Removing it leaves the lighter socket exposed, so simply pull it out of the hole in the plastic.

Is the cigarette lighter still attached to the car?

The cigarette lighter socket may still be attached to the rest of the car, so don’t rip the panel off as soon as you detach it. This is especially true if the socket is near the radio, since the radio and climate control wires most likely also attach to the panel.

How do you remove a fuse from a cigarette lighter?

You can usually remove a fuse box cover by hand, but you may also need a Phillips head screwdriver for yours. Once you locate the fuse responsible for the cigarette lighter, use needle-nose pliers to pull it out of the box. Set the small fuse aside in a safe location until you’re ready to put it back.

How do you remove a cigar lighter socket?

Remove the cigar lighter fuse. Remove the cigar lighter element. Remove the cigar lighter socket by placing one side of the “T” portion of J 42059 into the tab window. Angle the other side of the tool into the opposite tab window. Pull the socket straight out. Remove the tool from the lighter socket.

The cigarette lighter socket may still be attached to the rest of the car, so don’t rip the panel off as soon as you detach it. This is especially true if the socket is near the radio, since the radio and climate control wires most likely also attach to the panel.

Where can I get a lighter socket out of my car?

Then, you can get a socket out of the dashboard or the lower half of your vehicle by removing interior panels. Remove a lighter socket to replace it with a new one or an alternative to charge any device you need while driving.