How often should you clean the condenser coil on a refrigerator?

How often should you clean the condenser coil on a refrigerator?

Refrigerators have probably done more to positively impact the modern kitchen than any other appliance. Largely unappreciated until they fail, they need only a minimal amount of maintenance to run effectively. This maintenance mostly consists of a simple cleaning of the condenser coil at 12 month (or less) intervals.

Where are the condenser coils on a refrigerator?

Refrigerator coils, sometimes called condenser coils, are black coils that are found on the back or bottom of your fridge. If there is lots of dirt or dust on the coils, the refrigerator requires more energy to cool your food and can eventually break down.

How often should I Clean my refrigeration unit?

The condenser coil itself should be cleaned at least once a month to keep free of dirt and dust buildup. A great way to clean this part of the unit is to use a wet-dry vac.

What should I do if my air cooler is opening too often?

Check the condenser for a buildup of dirt and dust as well, and clean it as soon as possible. Door open too frequently – If you keep opening the door frequently, try to lower the number of trips to the unit so there is enough time for the cabinet to pull back down.

How often do you need to clean refrigerator coils?

To keep your refrigerator humming, you should clean coils every six months to a year, more often if you have shedding pets. It’s a short and easy task, and definitely one you shouldn’t avoid. ” Refrigerators are very low-maintenance overall,” says Notini, who recommends adding coil cleaning to your list of spring-cleaning chores.

When do you need to replace a condenser coil?

Warranty Violations – The majority, if not all system warranties clearly state that whenever you have a need to replace an evaporator or a condenser coil that you must purchase the same size for replacement.

How big should my evaporator and condenser coils be?

Most residential AC sizing varies from 1 to 5 tons. So, for example, a 2-ton evaporator coil should only be paired with a 2-ton condenser coil. Now let’s look at some problems that can pop up when these two coils don’t match in size. Mismatched problem #1: Higher monthly energy bills

Check the condenser for a buildup of dirt and dust as well, and clean it as soon as possible. Door open too frequently – If you keep opening the door frequently, try to lower the number of trips to the unit so there is enough time for the cabinet to pull back down.